The New Holland T6 Methane Power is the world’s first 100% methane powered production tractor and is key to completing the virtuous cycle of the Energy Independent Farm system. Farmers grow crops and use waste products to generate biomethane, which powers the tractor, which, in turn, helps to grow those very crops.

Proven engineering

The T6 Methane Power builds upon the renowned T6 range of tractors. This outstanding design has now been enhanced with a 6 cylinder, 150hp (110kW) Natural Gas engine, which is coupled to the proven Electro Command™ four-speed semi-powershift transmission.

With the same levels of power and torque as its diesel equivalent, you also benefit from up to 30% lower running costs. Producing 98% less particulate matter, reducing CO2 emissions by 11% and overall emissions by 80%, when using biomethane near-zero CO2 emissions are achievable.

Pure power

The power and torque produced by the methane engine are comparable to those of a standard production T6 tractor. This means that the T6 Methane Power responds in exactly the same way and enables you to complete the same tasks as before, just more sustainably and with a reduced operating cost.

The T6 Methane Power features an all-new NEF 6.7L engine specifically developed for agricultural applications by FPT Industrial, a leader in natural gas powertrain technology, with over 20 years’ experience and more than 70.000 gas engines produced to date.

Methane and biomethane are incredibly clean burning fuels, with up to 80% lower polluting emission than diesel. As such there is a reduced requirement for after treatment: less polluting exhaust gases are produced so less ‘cleaning’ is required. A simple 3-way catalyst is used which is a light and compact solution that is package under the engine hood.

In applications where a constant PTO speed is required, Engine Speed Management ensures the selected speed is accurately maintained under changing loads; it’s also perfect for maintaining a fixed forward speed in difficult terrain.

Electro command

The Electro Command™ semi-powershift transmission allows you to select eight gear speeds via up and downshift buttons on the control lever. The third button selects the range change. The standard IntelliShift™ technology, improves the quality of the gear shift, automatically selecting the right gear for the job, giving you slick gear changes to improve your comfort and productivity.

Great manoeuvrability, improved traction, higher outputs

New Holland’s range of axles is engineered to perfectly match your requirements. All T6 tractors can be specified with structurally light but strong front axles to fully exploit a front loader or linkage. An overall maximum gross vehicle weight of 10500kg on all models, when combined with perfect weight distribution and efficient ballasting optimises traction and means you’ve got even more flexibility when using heavy mounted implements or when ballasting. All models benefit from a 2642mm wheelbase which ensures a 4300mm turning radius for ultimate manoeuvrability. All T6’s come with a robust 275mm flanged rear axle as standard. For operations looking for ultimate flexibility.

Strong, efficient and powerful

The maximum lift capacity on the T6.180 Methane Power is a massive 7864kg. The rear linkage and hydraulics are designed to work with heavy mounted equipment over extended periods. The system also incorporates integral dynamic ride control shock load protection. This will reduce bounce when travelling with a heavy linkage load at transport speeds. Fender mounted controls for the rear linkage, a rear remote and the PTO are available.

Hydraulic power and PTO flexibility

Have you ever thought about just how much hydraulic flow you need? All T6 Methane Power tractors are fitted with a Closed Centre Load Sensing (CCLS) hydraulic system as standard. Delivering 121 litres/minute that will power even the most demanding implements including specialist vegetable harvesters. If that wasn’t enough, New Holland has engineered the CCLS system to operate at peak efficiency.

The benefit? Full hydraulic power is always available at the remote valves and linkage, but only as much as is needed.

The result? Reduced fuel consumption. Regardless of how hard your tractor is working, the steering will always remain light and easy to use, and loader cycle times remain uncompromised thanks to a separate 47 litres/minute service pump or optional 67 litres/minute pump when fitted with Class 4 front axle.

Remote valves

The T6 range can be specified with up to four mechanical rear remote valves. Up to three mid mount remote valves to operate the front linkage or a loader are also available, and they are controlled via an ergonomic, fully integrated joystick in the cab.

Direct drive for fuel efficiency

All T6 tractors are fitted with a direct drive PTO to minimise power loss between the engine and the implement. The PTO is engaged via a push-pull control, with advanced Soft Start management. This modulates engagement of high inertia attachments to protect the driveline. Safety has been further enhanced with the inclusion of an intentional PTO switch, which must be selected to keep the PTO engaged when leaving the operators seat. Additional PTO options include Auto PTO which disengages PTO at pre-set rear linkage heights.

Electronic draft control

A single raise/lower switch makes it simple to lift and return an implement to work during a

headland turn. How? New Holland’s ergonomic EDC is positioned just to your right, exactly where you need it, giving you ultimate precision. To fine-tune the system, you can use the intuitive controls that are found underneath the armrest, precisely where you would expect them to be. You can even activate the HTS functionality with your thumb at the touch of the ergonomically located button.

Horizon™ cab: More space, better visibility

Want all around visibility? The New Holland’s industry leading Horizon™ cab is the solution. In the yard, in the field or on the road, you have an uninterrupted, productivity enhancing view. The new sun-visor protects you from the harshest rays. Whisper quiet comfort is courtesy of a mere 70.5dB(A) cab noise level.

Bright lights for dark nights

Lighting up the way for improved nighttime productivity and total safety is a New Holland key priority, accomplished by bringing into the farming world the latest automotive sector innovations, such as LED lights. The lighting offering features up to 16 LED lights. Brighter and less power-consuming than their standard equivalent, these lights offer a broad spread of white light, turning night into day. Up to 6 lights can be fitted in the front and rear of the roof, while high level headlamps light up the distance and pave the way for non-stop operation.

LED lights are efficiency itself: more light, more durability, less power consumption. The optional 360 package includes an adjustable light at each corner of the cab. The rear lights are independently switched to reduce glare if working alongside a harvester. The standard signature lights bring a modern stylish addition to the familiar New Holland hood lights, there’s even a New Holland logo within the light unit.

There are three cab lighting packages available, consisting of eight, twelve and sixteen LED cab lights in various configurations, to suit your individual requirements. The 2 year / 2000 hour Service Plus warranty is standard.

For more information contact your nearest New Holland Dealer or call Jaco du Preez on 082-524-8898.